kruss K11 MK3 - Data Transfer

Data transfer to external media (optional) page 85
12.2.4 data transfer
1. Activate data transfer with the button.
2. Start the K11 measurement. General information about the measurement appears
in the Data-Logger window, transferred measured values are listed below:
3. Data transfer is terminated with the
button when the measurement or series of
measurements are complete.
!
The recorded measuring data cannot be saved while the transfer mode is still
switched on.
4. Save the data by using the
button or with the help of the menu item File →
Save as .
*
Data listed in the Data-Logger window can be printed out directly by using the
button.