Setup and starting up page 15
3.4.3 Computer connection (optional)
The K11 is connected to the computer via a serial interface.
Connect the
SERIAL PC
interface connector on the back of the K11 to a
corresponding interface on the computer.
3.4.4 Connecting an external thermostat (optional)
Connect the thermostat outlet to the Quick-Lock
THERMOSTAT IN
connector on
the back of the K11.
Connect the thermostat inlet to the Quick-Lock
THERMOSTAT OUT
connector on
the back of the K11.
To Next Page
Loading...
Need help?
General
