kruss K11 MK3 User Manual

Ring method measurements page 59
8.4.2 Interfacial tension push
 Check whether all the requirements contained in the check list (Ö ch. 6.5) have
been met.
 Select the measuring mode IFT-push . Start the measurement with ENT key.
The following table shows the course of the measurement:
Ring method: Interfacial tension push
Display Action Explanation
Sample:
enter a name for
the liquid system
Insert the sample and
use the keypad to
enter a sample
name.
Maximum 22 characters
Only if defined in
Setup:
In succession
Field 1 , Field 2 ,
Field 3
Enter the required
contents in the text
fields
The text fields, whose number is
defined in Setup, are called up in
succession (max. 3) and are used
to describe the measurement. The
text fields can be named in
LabDesk and these fields
assigned to the corresponding
data of the current measurement.
User:
please enter a
name
Use the keypad to
enter an operator
name.
Maximum 22 characters

kruss K11 MK3 Specifications

General

Brand	kruss
Model	K11 MK3
Category	Measuring Instruments
Language	English