To Next Page

To Previous Page

Contents page 1

Contents

General information ....................................................................................... 7

1.1 General safety instructions.................................................................................................7

1.2 Intended use ......................................................................................................................8

1.3 Procedure if repairs should be necessary .......................................................................... 8

1.4 Technical support............................................................................................................. 10

2 Introduction.................................................................................................. 11

3 Setup and starting up................................................................................... 12

3.1 Transport.......................................................................................................................... 12

3.2 Location and ambient conditions...................................................................................... 12

3.3 Levelling the instrument ................................................................................................... 13

3.4 Connectors and connections............................................................................................ 14

3.4.1 Power supply.............................................................................................................. 14

3.4.2 Connecting the K11 Control Panel ............................................................................. 14

3.4.3 Computer connection (optional) ................................................................................. 15

3.4.4 Connecting an external thermostat (optional).............................................................15

3.5 Assembling a thermostat jacket (optional) ....................................................................... 16

3.5.1 Assembling an external temperature measuring probe (optional) ..............................18

3.5.2 Inert gas connector (optional)..................................................................................... 18

3.5.3 Installation of the protocol printer (optional) ...............................................................19

4 Operating the instrument ............................................................................. 20

4.1 Switching the instrument on and off ................................................................................. 20

4.1.1 Mains switch............................................................................................................... 20

4.1.2 On/Off key on the Control Pad (switch on / standby) ................................................. 20

4.1.3 Resetting the instrument ............................................................................................ 21

4.1.4 Warming-up time........................................................................................................21

4.2 Error message behaviour................................................................................................. 21

4.3 The control panel (overview)............................................................................................ 22

4.4 The display....................................................................................................................... 22

4.5 Moving the sample stage ................................................................................................. 23

4.5.1 Safety Instructions...................................................................................................... 23

4.5.2 Moving the sample platform using the rotary knob..................................................... 24

4.5.3 Saving and activating standard sample platform positions.........................................24

kruss K11 MK3 User Manual

Questions and Answers: