Kurzweil Artis SE - Features of the Artis SE

Features of the Artis SE
Powering Up Defaults
3-1
Chapter 3
Features of the Artis SE
is chapter will help familiarize you with the features of the Artis SE. Many of these features
have both general functions and mode-specic functions. For more in-depth descriptions of
these features, refer to the chapters on the individual modes.
Powering Up Defaults
In general, the Artis SE will always remember the last selection made by the user. However,
powering up the Artis SE resets some of these settings back to their power-on defaults.
Parameters Reset To Defaults At Power-On
• Transpose set to 0 semitones.
• MIDI Channel set to 1.
• At startup Multi Mode is set to the Favorite (or category default) Multi of the Piano1
category.
• Entering Program Mode the selected Program is set to the Category Default Program
of the factory Piano1 category.
Parameters Remembered After Power-On
• User Programs.
• User Multis.
• Favorites.
• Default Program per Category.
• Default Multi per Category.
• EQ On/O state.
• Global Mode parameters Velocity Map, View, Destination & Pedal overrides, and
AutoPowerO parameters