Multi Mode
Selecting Multis
7-3
Alpha Wheel and – & + Value Buttons
Use the Alpha Wheel or the Value buttons, to the right of the display below the Alpha
Wheel, to change the current Multi. Turning the Alpha Wheel counter-clockwise or
pressing the – button will select the previous Multi and turning the Alpha Wheel clockwise
or pressing the + button will select the next Multi. When the highest or lowest Multi is
reached, the list will wrap back to the last or rst Multi respectively.
Value Jump Buttons
In Multi Mode, the Value Jump double button press selects the rst Multi
of each Category, as well as the Category Default Multi of each Category
(if a Category Default Multi has been set). For more information on
choosing a new Category Default Multi, see Choosing Category Default
Multis on page 7-4. If the User button is selected, Value Jump works the
same way.
Category & Program/Multi Buttons
e Category buttons allow you to select Multis from a group of 8 Multis per category.
Multis are not categorized by instrument type, so the instruments used in a Multi may not
match its category name (category instrument names only apply to selecting Programs in
Program Mode). You can select one Category button at a time and the current Category
button’s LED is lit.
Each Category contains 8 Multis. First select the Category you want, then select one of the 8
Multis by pressing any of the Program/Multi buttons numbered from 1 to 8.
To Next Page
Loading...
