Kurzweil Artis SE - Selecting Parameters; The Display; Scrolling Messages; Param;Channel Buttons

Multi Edit Mode
Selecting Parameters
8-4
Selecting Parameters
The Display
In Multi Edit Mode, the top line of the display shows the current Mode, Zone number and
the current parameter number as well as the total the number of available parameters. e
bottom line of the display shows the current parameter and value.
Scrolling Messages
Some parameters (such as Local Program) may be too long for the display, and will appear as
scrolling text on the lower line.
Param/Channel Buttons
Use the Param/Channel ▲ and ▼ buttons to scroll through the parameter list.
Alpha Wheel and Value buttons
Use the Alpha Wheel or the – & + buttons
below the wheel to change the parameter value—
turning the Alpha Wheel counter-clockwise or
pressing the – button will select the previous
value and turning the Alpha Wheel clockwise or
pressing the + button will select the next value.
Value Jump Buttons
Pressing the + and – buttons simultaneously resets the parameter to its default value.
Param Jump Buttons
Pressing the Param/Channel ▲ and Param/Channel ▼ buttons simultaneously jumps
parameters to specic jump points. e jump points are: Local Program, Transpose, Low
Key, ModWheel Destination, Slider1 Destination, Slider6 Destination, Slider11 Destination,
Pedal Switch Destination, Aux Eect Override (Common).
EditMulti Zn:1 2/90
Channel:1