Kurzweil Artis SE - Selecting and Editing Parameters

Global Mode
Selecting and Editing Parameters
9-2
Selecting and Editing Parameters
To scroll through the parameters (and dialogs) of Global Mode, use the Param/Channel
buttons.
Parameter or Dialog Range of Values Default Value
Tune -100 to 100 Cents 0 Cents
Velocity Map Linear, Light 1, Light 2, Light 3,
Hard 1, Hard 2, Hard 3, Piano Touch,
Easy Touch, GM Receive
Linear
FX Select (FXSel) Performance, Multitrack Performance
Auto Power Off Enable, Disable Enable
Auto Power Off Time 15min, 30min, 1hour, 2hour, 4 hour 4hours
Pedal Noise Off, On Off
Hard Reset? (See corresponding section below)
Soft Reset? (See corresponding section below)
Bank Select (BankSel) 0, 32, 0/32 0/32
Program Change
(ProgChg)
On, Off On
Channel Enable
(Chan1–16)
Enable, Disable Enable
Local Keyboard Chan-
nel (LclKbdChan)
None, 1 to 16 None
SysEx ID 0 to 127 3
OS/Objects
(See corresponding sections below)
Delete Objects?
To edit the currently selected parameter, use the Alpha Wheel or the – and + buttons.
Pressing Value Jump (both – & + buttons simultaneously) will jump to a dierent value
depending on the parameter—the jump value is mentioned in each of the parameter
descriptions below. If you exit Global Mode (using the Exit button) and return to it before
powering o, it will return to the last parameter you accessed previously.