Storage Mode
10-1
Chapter 10
Storage Mode
ere are four functions within Storage Mode: Use the Param/Channel buttons to step
through the Storage options:
• Device
• Store?
• Load (Overwrite)?
• Load (Fill)?
Device
Use the Device option to select a device to store to or load from. Two connections are
provided on the rear panel of the Artis SE. e Computer port is used to communicate with
a computer or tablet; the Storage port will accept a USB storage device such as a thumb
drive. Make sure the device is connected, then use the – & + buttons to select the desired
device. Select PC to load/store via a computer/tablet using a connected USB cable, or select
USB to load/store using a connected USB storage device.
To Next Page
Loading...
