Kurzweil Artis SE - MIDI Program

Multi Edit Mode
The Zone-specic Parameters
8-9
NOTE: When you change the Local Program parameter, the MIDI Bank and MIDI
Program parameters will automatically change to match the Bank and Program numbers of
the Program that you select for Local Program. For example, if you choose Program 178,
then MIDI Bank will change to 1 and MIDI Program will change to 49.
MIDI Program
e MIDI Program parameter determines the MIDI Program change message that the
currently selected Zone sends when the Multi is loaded. You can set this parameter to a
MIDI Program change message from 0 to 127.
When using the Artis SE as a MIDI controller, sending a MIDI Program change message
(along with a MIDI bank change message) when a Multi is loaded ensures that the Program
loaded on the other sound modules in your MIDI chain is the Program that you want. For
example, if you’ve congured a Multi to work in a specic way with Program 32 in Bank5
of a connected sound module, then set MIDI Bank to 5 and MIDI Program to 32. is
way, whenever you load this Multi, the sound module will automatically load Program 32 in
Bank5.
NOTE: When you change the Local Program parameter, the MIDI Bank and MIDI
Program parameters will automatically change to match the Bank and Program numbers of
the Program that you select for Local Program. For example, if you choose Program 178,
then MIDI Bank will change to 1 and MIDI Program will change to 49.