Kurzweil Artis SE - Terminology; Program; Multi

Terminology
4-1
Chapter 4
Terminology
is chapter provides denitions and descriptions for all of the Artis SE-specic terms used
in this manual. Some of the terms are also used by other manufacturers.
Since there are no standard denitions for some of these terms, they are described here to
avoid confusion. All of these terms appear with the rst letter capitalized as proper nouns in
this manual to make it easy to distinguish between the generic term and the Artis SE specic
term.
In addition to the terms below, and to avoid confusion, any Artis SE specic feature,
connector or control will have the rst letter capitalized to distinguish it from the generic
term. Physical button labels will be shown in bold type.
Program
A Program is an instrument sound that plays on a MIDI
channel. e sound of each Program can be modied by
parameters that are assigned to the controllers (Sliders,
Switch buttons, Mod Wheel, and Pedals).
See Program Mode on page 6-1 for more information on
Programs.
Multi
A Multi allows up to 4 instrument sounds (Programs) to be
played from the keyboard at once. A Multi has 4 Zones,
each with its own keyboard range, Program, MIDI channel,
and controller assignments.
See Multi Mode on page 7-1 for more information on
Multis.