Program Mode
The Split Function
6-7
ere are four parameters (described below) that determine the behavior of the Split. ese
can be accessed by using the Param/Channel buttons.
Split Program
Move the Alpha Wheel or use a Category/Program button to select the Split Program.is
determines the Program for the left-hand side of the Split keyboard. Initially the last used
Split Program will be selected, or, if this is the rst time using the Split Function since power-
up, the default Split Program (106 Motown Bass) will be selected.
Split Volume
Press the Param/Channel ▲ button to select the Split Volume parameter. is determines
the balance of the left and right-hand Programs. By default, the Split Volume is set to 0,
which results in both Programs having the same volume. When set to a positive number, the
volume for the right hand Program is decreased. When set to a negative number, the volume
for the left hand Program is decreased. To set the Split Volume, use the Alpha Wheel, or –
and + buttons. Split Volume can be set to any number between -127 and 127. Pressing the
Value Jump button pair resets the volume to 0.
To Next Page
Loading...
