System Menu > NetworkSettings
483
[TCP/IP Settings]
For the setting values, refer to the following:
➡ TCP/IP SettingsTCP/IP Settings (page 469)
➡ Bonjour (page 479)
➡ IPSec (page 480)
[Others]
For the setting values, refer to the following:
➡ NetWare (page 483)
➡ AppleTalk (page 483)
➡ MAC Address Filter (page 484)
Wired Network Settings (Optional Network)
NOTE
This function will be displayed when the optional Network Interface Kit (IB-50) is installed.
[TCP/IP Settings]
For values, refer to the following:
➡ TCP/IP SettingsTCP/IP Settings (page 469)
➡ Bonjour (page 479)
➡ IPSec (page 480)
[Others]
Item Description
[NetWare] Use NetWare to receive documents.
➡ Network Interface Kit Operation Guide
Value: [Off], [On]
[AppleTalk] Set whether to receive documents using the AppleTalk. The setting will
be changed after restarting the device or the machine’s network.
Value: [Off], [On]
[LAN Interface] Select the LAN interface. The setting will be changed after restarting the
device or the machine’s network.
Value: [Auto], [10BASE-T Half], [10BASE-T Full], [100BASE-TX Half],
[100BASE-TX Full], [1000BASE-T]
NOTE
This function will be displayed when the optional Network Interface Kit is
installed.
To Next Page
Loading...
