8-23
Setup and Registration (System Menu) > Operation Method
IPP Over TLS -
Off/On Select whether to use IPP to receive documents secured by TLS.
*1, *3
Value: Off, On
When selecting [On], it also requires a certificate for TLS. the default certificate is the self-
certificate of the machine.
Command Center RX User Guide
Port Number Specifies the port number used. The default port number is 433.
*1
Value: 1 to 32767
This function is displayed when [Off/On] is set to [On].
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
HTTP -
Off/On Select whether to communicate using HTTP.
*1
Value: Off, On
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
HTTPS -
Off/On Select whether to communicate using HTTPS.
*1, *3
Value: Off, On
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
LDAP -
Off/On Select whether to use LDAP.
Value: Off, On
Item Description
To Next Page
Loading...
Need help?
General
