8-25
Setup and Registration (System Menu) > Operation Method
EnhancedWSD(TLS) -
Off/On Set whether to use our proprietary web services over TLS.
*1, *3
Value: Off, On
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
VNC(RFB)overTLS -
Off/On Set when using a remote operation protected by TLS by starting up a VNC Viewer other
than ours (example: Real VNC).
*1, *3
Value: Off, On
If the setting is [On], a TLS certificate is required. The factory certificate is the
certificate owned by the machine.
Command Center RX User Guide
Port Number Specifies the port number used. The default port number is 9063.
*1
Value: 1 to 32767
This function is displayed when [Off/On] is set to [On].
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
VNC(RFB) -
Off/On Set when using a remote operation by starting up a VNC Viewer other than ours
(example: Real VNC).
*1
Value: Off, On
Port Number Specifies the port number used. The default port number is 9062.
*1
Value: 1 to 32767
This function is displayed when [Off/On] is set to [On].
Available Net. -
Wi-Fi Direct
*2
Set whether to enable this function for each network.
Value: Disable, Enable
This function is displayed when [Off/On] is set to [On].
Wi-Fi
*2
Wired Network
Item Description
To Next Page
Loading...
Need help?
General
