No. Description Supplement
(45) Black and white printing double
count mode
0: All single counts
3: Folio, Single count, Less than 330 mm (length)
(46) Billing counting timing -
(47) Temperature (machine inside) -
(48) Temperature (machine outside) -
(49) Relative temperature
(machine outside)
-
(50) Absolute temperature
(machineoutside)
-
(51) LXI calibration information -
(52) Fixed assets number -
(53) Job end judgment time-out time -
(54) Job end detection mode -
(55) Media type attributes
1 to 28 (Not used: 18, 19, 20)
Weight settings
0: Light/1: Normal 1 / 2: Normal 2 / 3: Normal 3/
4: Heavy 1 / 5: Heavy 2 / 6: Heavy 3 / 7: Extra
Heavy
Fuser settings
0: High / 1: Middle / 2: Low / 3: Vellum
Duplex settings
0: Disable / 1: Enable
(56) RFID information -
(57) RFID reader/writer version infor-
mation
-
(58) Toner installation mode
information
-
(59) Drum status 1 byte
(60) Drum surface potential 16 byte
(61) Drum sensitivity 16 byte
(62) Quantity of light (LSU) 32 byte
(63) DRT parameter coefficient 1012 byte
(64) Soft version of the optional paper
feeder
-
(65) Version of the optional message -
(66) Maintenance information -
To Next Page
Loading...
