Kyocera FS-3040MFP

2LW/2LX
1-5-6
1-5-3 Paper feed section
(1) Detaching and refitting the paper feed assembly (paper feed roller and pickup
roller)
Procedure
1. Remove the cassette.
2. While pushing the lock and then slide
the paper feed roller pin.
3. While pressing the lever and then
remove the paper feed assembly.
4. Check or replace the paper feed
assembly and refit all the removed
parts.
NOTE:
When the periodic maintenance
(replacing the maintenance kit, see
page 2-4-4), perform maintenance
mode.:
U251 Clearing the maintenance count
(see page 1-3-26)
Figure 1-5-7
Cassette
Paper feed assembly
(Paper feed roller)
Paper feed roller pin
Lever
Lock
Spring
(Pickup
roller)