2LW/2LX
1-4-29
(2) Scan to FTP error codes
Code Display Causes Check procedures/corrective measures
1101 Error: Host name Enter the disable host
name/IP address.
Enter the correct host name or IP address.
1102 Error: User/Password Domain name is not
entered.
Enter the user name with the form of either
[Domain¥User] or [Domain/User].
Assign disable user/pass-
word.
Enter the correct user name/password.
1103 Error: Path Name or
File Name
Connect to the folder
which is not permitted for
reference/writing.
Enter correct user name/password.
Check the access limit of destination folder.
Assign disable folder path. Enter correct folder path.
1105 Error: Not support
protocol
FTP Protocol is set to OFF. Check ON in the [Scanner]-[FTP] screen in
COMMAND CENTER.
2101 Error: Can not con-
nect
Enter the disable host
name/IP address.
Enter the correct host name or IP address.
Assign the wrong port
number.
Enter the correct port number.
Network is not connected. Check if the server is operating properly.
Check the network connection (cable. net-
work condition within LAN, etc.).
2102 Error: Can not con-
nect with timeout
The server is unable to
communicate.
Check if the server is operating properly.
Send the server which
does not support FTP
server.
Enter the correct host name or IP address.
2103 Error: Response wait
with timeout
The server is unable to
communicate.
Check if the server is operating properly.
2201 Error: Network trans-
fer
Error occurs on the net-
work.
Check the network connection (cable. net-
work condition within LAN, etc.).
2202 Error: Network trans-
fer with timeout
Error occurs on the net-
work.
Check the network connection (cable. net-
work condition within LAN, etc.).
2203 Error: Response wait
with timeout
Response is not returned
from the server above
specified time.
Check the network connection (cable. net-
work condition within LAN, etc.).
3101 Error: Server
response
The server is error status. Check if the server is working properly.
9181 Error: Page max
count over
The number of pages of a
send file exceeded 999
pages.
Set the number of pages as 999 or less.
To Next Page
Loading...
