2LW/2LX
1-5-45
(2) Detaching and refitting the main drive unit
Procedure
1. Remove the right cover.
(See page 1-5-3)
2. Remove the controller box.
(See page 1-5-34)
3. Remove two connectors.
4. Remove five screws and then remove
the main drive unit.
5. Check or replace the main drive unit
and refit all the removed parts.
Figure 1-5-68
Screw
Screw
Screw
Connectors
Screw
Screw
Main drive unit
To Next Page
Loading...
