2LW/2LX-4
2-4-6
Print density D4 Number from 1 (Light) to 5 (Dark) 3
Total host buffer size H8 0 to 99 in units of the size defined by FRPO S5 5
Form feed time-out value H9 Value in units of 5 seconds (0 to 99). 1
KIR mode N0 0: Off
2: On
2
Duplex binding N4 0: Off
1: Long edge
2: Short edge
0
Sleep timer time-out time N5 1 to 240 minutes [0: Off] 15
Ecoprint level N6 0:Off
2:On
0
Printing resolution N8 0: 300dpi
1: 600dpi
3: 1200dpi
1
Default emulation mode P1 0: Line Printer
1: IBM Proprinter X24E
2: Diablo 630
5: Epson LQ-850
6: PCL 6
9: KPDL
6
Carriage-return action * P2 0: Ignores 0x0d
1: Carriage-return
2: Carriage-return+linefeed
1
Linefeed action * P3 0: Ignores 0x0d
1: Linefeed
2: Linefeed+carriage-return
1
Automatic emulation sensing
(For KPDL3)
P4 0:AES disabled
1:AES enabled
0
Alternative emulation
(For KPDL3)
P5 Same as the P1 values except that 9 is ignored. 6
Automatic emulation
switching
trigger
(For KPDL3)
P7 0: Page eject commands
1: None
2: Page eject and Prescribe EXIT
3: Prescribe EXIT
4: Formfeed (^L)
6: Page eject, Prescribe EXIT and formfeed
10: Page eject commands; if AES fails, resolves
to KPDL
10
Environment Param
eter
Values Factory
setting
To Next Page
Loading...
