2LW/2LX-6
1-3-3
Fax
U605 Clearing data -
U610 Setting system 1
Setting the number of lines to be ignored when receiving a
fax at 100% magnification
Setting the number of lines to be ignored when receiving a
fax in the auto reduction mode
Setting the number of lines to be ignored when receiving a
fax (A4R/LetterR) in the auto reduction mode
3
0
0
U611 Setting system 2
Setting the number of adjustment lines for automatic reduc-
tion
Setting the number of adjustment lines for automatic reduc-
tion when A4 paper is set
Setting the number of adjustment lines for automatic reduc-
tion when letter size paper is set
7
22
26
U612 Setting system 3
Selecting if auto reduction in the auxiliary direction is to be
performed
Setting the automatic printing of the protocol list
ON
OFF
U620 Setting the remote switching mode ONE
U625 Setting the transmission system 1
Setting the auto redialing interval
Setting the number of times of auto redialing
3 (120 V)
2 (220-240 V)
2 (120 V)
3 (220-240 V)
U630 Setting communication control 1
Setting the communication starting speed
Setting the reception speed
Setting the waiting period to prevent echo problems at the
sender
Setting the waiting period to prevent echo problems at the
receiver
14400bps/V17
14400bps
300
75
U631 Setting communication control 2
Setting ECM transmission
Setting ECM reception
Setting the frequency of the CED signal
ON
ON
2100
U632 Setting communication control 3
Setting the DIS signal to 4 bytes
Setting the short protocol transmission
Setting the reception of a short protocol transmission
Setting the CNG detection times in the fax/telephone auto
select mode
OFF
ON
ON
2TIME
U633 Setting communication control 4
Enabling/disabling V.34 communication
Setting the V.34 symbol speed (3429 Hz)
Setting the number of times of DIS signal reception
Setting the reference for RTN signal output
ON
ON
ONCE
15%
Section
Item
No.
Content of maintenance item
Initial
setting
To Next Page
Loading...
