FS-6020
1-4-5
Service items Description
Item Description
& Duplexer life counter
* Maintenance kit counter
( Optional unit version
) Serial interface information
⁄ Drum sensitivity information
¤ Optional unit information
‹ Average printing ratio (2 digits for integer
part, 1 digit for decimal part)
› Operation panel message language
fi Toner capacity setting
fl Engine parameter setting
‡ Media type attributes
— Media type attributes
· Memory SPD information (slot 1)
‚ Machine serial number
/Duplexer (total)/Duplexer (small)/Duplexer (large)/
* “Total” is calculated by adding the number for “small” to 2 ×
number for “large” (double count).
* “Small” means sizes of which the length in the sub-scan
direction is less than 335 mm (length of legal size), and
“large” means sizes of which the length is 335 mm or more.
-
/Feeder 2/Feeder 3/Feeder 4/Feeder 4/Duplexer/
RS2: RS-232C RS4: RS-422A
-
Upper 2 bytes
Bit 0: MPF
Bits 1 to 6: Feeders 1 to 6 (6 is not supported)
Bit 7: Duplexer
Bits 8 to 15: Reserved
Lower 2 bytes
Bit 0:
Bit 1: Face-up (not supported)
Bits 2 to 15: Reserved
Printing ratio for the total period from shipping
(displayed in %)
PMSG command setting (decimal)
Decimal (× 100 sheets)
Hexadecimal, 32 bytes (64 digits)
Media type setting value from 1 to 28 (fixing temperature,
paper thickness, duplex printing)
(14 to 20 are unused and always 0x00.)
Media type setting value from 1 to 28 (print density)
(14 to 20 are unused and always 0x00.)
Bus error if all digits are “E”.
-
To Next Page
Loading...
