Chapter 1 Introduction 11
TOTHEEXTENTPERMITTEDBYLAW,NOCLAIMMAYBEBROUGHTAGAINSTLABORIE,WHETHERINCONTRACT,
TORTOROTHERWISE,MORETHANONE(1)YEARAFTERTHEPRODUCTSWEREDELIVERED.CUSTOMER’SSOLE
REMEDY,ANDLABORIE’SSOLELIABILITY,FORANYCLAIM,WHETHERFORBREACHOFWARRANTYOROTHER
BREACHOFTHISAGREEMENTORBASEDONANYOTHERTHOERY,WILLBETHEREPAIRORREPLACEMENTAS
PROVIDEDFORUNDERTHESECONDITIONS.EXCEPTFORTHISLIMITEDLIABILITY,UNDERNOCIRCUMSTANCES
WILLLABORIEBELIABLEFORANYDAMAGESWHATSOEVER,INCLUDINGWITHOUTLIMITATIONDIRECT,INDIRECT,
SPECIAL,INCIDENTAL,EXEMPLARY,CONSEQUENTIALORPUNITIVEDAMAGES,ORDAMAGESFORLOSSOF
PROFITS,DATA,USEOROPPORTUNITY,WHETHERORNOTSUCHDAMAGESWEREFORESEENORUNFORESEEN,
ANDWHETHERORNOTLABORIEWASADVISEDOFTHEPOSSIBILITYOFSUCHDAMAGES.
The Laborie alpHaONE Application
TheLaboriealpHaONEapplicationisprovidedonaUSBmemorystickandmustbeinstalledonthecomputerinorder
for the complete system to function. For an overview of the software messages that require an action to resolve, see
AppendixF,“SoftwareMessages” on page 89.
The application is composed of three modules:
•
Database module. When you start the application, you will enter the Database module in which all available
patient information, investigation parameters, reports, and memos are stored. Simply select a patient to gain
easy access to all information for that patient.
•
Measurement module. This program is started from the Database module. The application guides you through
the preparatory phase of the investigation procedure.
•
Analysismodule.ThisprogramisstartedfromtheDatabasemodule.Here,youcaneditthepatientdiary,and
you can print the investigation graphs and parameters as an investigation report.
Figure1-7 diagrams the application and the relationship of the modules.
Measurement Module
AnalysisModule
Database Module
Figure1-7: TheLaboriealpHaONEApplication