LABORIE alpHaONE - Cleaning

80 Laborie alpHaONE User & Service Manual LBL-01791 [B]
 WARNING
Aftereachinvestigation,cleanthealpHaONErecorder.
 WARNING
Thereisariskofstrangulationduetoanexcessivelengthoftheshoulderbeltorothercables.
 WARNING
Safety can be compromised if, for example, the apparatus:
•
shows visible damage.
•
fails to perform the intended measurement.
•
has been subjected to prolonged storage under unfavourable conditions.
•
has been subjected to severe stresses in transit.
•
hasbeenhandledbyunqualiedpersonnel.
CAUTION
To prevent the loss of any data, be sure to exit the Laborie alpHaONE application before shutting down the
computer.
CAUTION
Automaticsafeguardsbuiltintothesoftwareshouldbeseenasanaid.Theyarenotasubstitutefor
careful personal monitoring and an alert investigator.
CAUTION
Remove the batteries when the alpHaONE system is not used for an extended period of time (i.e., more
thanthreeweeks).
 NOTE
AfterupdatingorupgradingtheLaboriesoftware,calculatedparameterscanbedifferentcomparedtothe
previous software version due to changed or improved analysis techniques or changed medical opinion or
insight.
Cleaning
CAUTION
To prevent damage of the alpHaONE measurement system, do not use thinners or similar solvents.
CAUTION
To prevent damaging the electronics, do not use excessive amounts of water for cleaning the alpHaONE
system.
CAUTION
Topreventdamagetothesystem,neverallowwatertoinltratethealpHaONEsystemoranyother
component.
Althoughprecautionshavebeentakeninthisapparatustopreventmalfunctionsduetoabnormalenvironmental
conditions and/or abnormal handling, such malfunction can occur in some circumstances.