EMG™ Edge Management Gateway User Guide 147
8: Services
System Logging and Other Services
Use the Services tab to:
Configure the amount of data sent to the logs.
Enable or disable SSH and Telnet logins.
Enable a Simple Network Management Protocol (SNMP) agent.
Note: The EMG supports both MIB-II (as defined by RFC 1213) and a private
enterprise MIB. The private enterprise MIB provides read-only access to all statistics
and configurable items provided by the EMG unit. It provides read-write access to a
select set of functions for controlling the EMG and device ports. See the MIB definition
file for details.
Identify a Simple Mail Transfer Protocol (SMTP) server.
Configure an audit log.
View the status of and manage the EMGs on the Secure Lantronix network.
Set the date and time.
Configure NFS and CIFS shares.
Configure the web server.
SSH/Telnet/Logging
To configure SSH, Telnet, and Logging settings:
1. Click the Services tab and select the SSH/Telnet/Logging option. The following page
displays.
To Next Page
Loading...
Need help?
General
