Lantronix EMG 8500 User Manual

17: Command Reference
EMG™ Edge Management Gateway User Guide 443
internal modem allowdialback <enable|disable>
auth <pap|chap> dialbacknumber <Phone Number>
loginhost <User Login/CHAP Host> dialbackdelay <Dial-back Delay>
localipaddr <negotiate|IP Address> dialbackretries <1-10>
remoteipaddr <negotiate|IP Address> timeoutlogins <disable|1-30 minutes>
routeipaddr <IP Address> modemtimeout <disable|1-9999 secs>
routemask <Mask> restartdelay <PPP Restart Delay>
routegateway <Gateway> cbcpnocallback <enable|disable>
nat <enable|disable>
Set the site password and CHAP secret (any extra parameters will be ignored):
set site dialoutpassword <Site Name>
set site chapsecret <Site Name>
Deletes a site:
set site delete <Site Name>
show site <all|names|Site Name>
SLC Network Commands
Displays all SLC, SLB, EMG, and Spider units on the local network.
set slcnetwork
Syntax
set slcnetwork <one or more parameters>
Parameters
add <IP Address>
delete <IP Address>
search <localsubnet|ipaddrlist|both>
Description
Detects and displays all EMG or user-defined IP addresses on the local network.
show slcnetwork
Syntax
show slcnetwork [ipaddrlist <all|Address Mask>]
Description
Detects and displays all SLC, SLB, and EMG on the local network.
Without the ipaddrlist parameter, the command searches the local network. With the
ipaddrlist parameter, the command displays a sorted list of all IP addresses or displays the IP
addresses that match the mask (for example, 172.19.255.255 would display all IP addresses that
start with 172.19).

Lantronix EMG 8500 Specifications

General

Brand	Lantronix
Model	EMG 8500
Category	Gateway
Language	English