17: Command Reference
EMG™ Edge Management Gateway User Guide 389
show radius
Syntax
show radius
Description
Displays RADIUS settings.
TACACS+ Commands
set tacacs+
Syntax
set tacacs+ <one or more parameters>
Parameters
state <enable|disable>
server1 <IP Address or Name>
server2 <IP Address or Name>
server3 <IP Address or Name>
encrypt <enable|disable>
authservice <login|pap|chap>
service <Service to Authorize>
protocol <Protocol for Service>
timeout <1-10 seconds>
dataports <Port List>
listenports <Port List>
clearports <Port List>
escapeseq <1-10 Chars>
breakseq <1-10 Chars>
custommenu <Menu Name>
allowdialback <enable|disable>
dialbacknumber <Phone Number>
group <default|power|admin>
permissions <Permission List>
Note: See User Permissions Commands (on page 390) for information on groups and
user rights.
Set the TACACS+ secret (any extra parameters will be ignored):
set tacacs+ secret
Description
Configures the EMG to use TACACS+ to authenticate users who log in via the Web, SSH, Telnet,
or the console port.
To Next Page
Loading...
Need help?
General
