17: Command Reference
EMG™ Edge Management Gateway User Guide 381
port <Key Distribution Center TCP Port>
realm <Kerberos Realm>
state <enable|disable>
useldapforlookup <enable|disable>
Description
Configures the EMG to use Kerberos to authenticate users who log in via the Web, SSH, Telnet, or
the console port.
show kerberos
Syntax
show kerberos
Description
Displays Kerberos settings.
LDAP Commands
set ldap
Syntax
set ldap <one or more parameters>
Parameters
state <enable|disable>
server1 <IP Address or Name>
server2 <IP Address or Name>
port <TCP Port>
base <LDAP Base>
bindname <Bind Name>
bindwithlogin <enable|disable>
useldapschema <enable|disable>
adsupport <enable|disable>
filteruser <User Login Attribute>
filtergroup <Group Objectclass>
grmemberattr <Group Membership Attribute>
grmembervalue <dn|name>
encrypt <starttls|ssl|disable>
dataports <Port List>
listenports <Port List>
clearports <Port List>
escapeseq <1-10 Chars>
breakseq <1-10 Chars>
custommenu <Menu Name>
allowdialback <enable|disable>
To Next Page
Loading...
Need help?
General
