17: Command Reference
EMG™ Edge Management Gateway User Guide 420
Description
Displays the members of a host list.
Internal Modem Commands
Configure the internal modem:
set intmodem <parameters>
Parameters
modemstate <disable|dialin|dialout|dialback|dialondemand> usesites
<enable|disable>
modemmode <text|ppp> group <Local or Remote Group Name>
timeoutlogins <disable|1-30 minutes> modemtimeout <disable|1-9999 sec>
localipaddr <ne
gotiate|IP Address>
restartdelay <PPP Restart
Delay>
remoteipaddr <negotiate|IP Address> calleridlogging <enable|disable>
auth <pap|chap> calleridcmd <Modem Command String>
chaphost <CHAP Host or User Name> initscript <Modem Init Script>
chapauth <chaphost|localusers> nat <enable|disable>
dialbacknumber <usernumber|Phone Number> checkdialtone <disable|5-600 min>
dialbackdelay <PPP Dialback
Delay> dialoutnumber <Phone Number>
dialbackretries <1-10> dialoutlogin <Remote User Login>
Set the modem password and CHAP secret (any extra parameters will be ignored):
set intmodem dialoutpassword
set intmodem chapsecret
Note: It is recommended that the initscript be prepended with 'AT' and include 'E1 V1 x4
Q0' so that the EMG may properly control the modem.
Display settings for the internal modem:
show intmodem
IP Filter Commands
set ipfilter state
Syntax
set ipfilter state <enable|disable> [testtimer <disable|1-120 minutes>]
Description
Enables or disables IP filtering for incoming network traffic.
To Next Page
Loading...
Need help?
General
