10: Device Ports
EMG™ Edge Management Gateway User Guide 185
Figure 10-3 Devices > Device Ports
Current port numbering schemes for Telnet, SSH, and TCP ports display on the left. The list of
ports on the right includes the individual ports and their current mode.
Note:
Icons that represent some of the possible modes include:
To set up Telnet, SSH, and TCP port numbering:
1. Enter the following:
Idle The port is not in use.
The port is in data/text mode.
Note: You may set up ports to allow Telnet access using the IP Setting per Device Ports -
Settings (on page 187).
An external modem is connected to the port. The user may dial into or out of the port.
Telnet in or SSH in is enabled for the device port. The device port is either waiting for a Telnet
or SSH login or has received a Telnet or SSH login (a user has logged in).
To Next Page
Loading...
Need help?
General
