8: Services
EMG™ Edge Management Gateway User Guide 168
3. Click the Apply button to save.
Admin Web Commands
Go to Administrative Commands to view CLI commands which correspond to the web page entries
described above.
Services - SSL Certificate
The Services > Web Server page enables you to view and update SSL certificate information. The
SSL certificate, consisting of a public/private key pair used to encrypt HTTP data, is associated
with the web server. You can import a site-specific SSL certificate or generate a custom self-
signed SSL certificate. The custom self-signed SSL certificates generated by the EMG use the
SHA256 hash algorithm.
To view, reset, import, or change an SSL Certificate:
1. On the Services tab, click the Web Server page and click the SSL Certificate link. The
following page displays the current SSL certificate.
Run Web Server If enabled, the web server will run and listen on TCP ports 80 and 443 (all
requests to port 80 are redirected to port 443). By default, the web server is
enabled. The web server supports TLS 1.0, TLS 1.1, and TLS 1.2. Due to
security vulnerabilities, SSL is not supported.
Note: This option can only be changed at the CLI.
To Next Page
Loading...
Need help?
General
