17: Command Reference
EMG™ Edge Management Gateway User Guide 455
Display RSA public key of the EMG:
show vpn rsakey
Display X.509 certificate for local peer (EMG) and remote peer:
show vpn certificate
Download IPSec conf file (VPN tunnel must be enabled to generate ipsec.conf for download; can
be customized and uploaded to access more strongSwan options):
set vpn confaction download via <sftp|scp> host <IP address or Name>
login <User Login> [path <Directory for download>]
Upload IPSec conf file to the EMG:
set vpn confaction upload via <sftp|scp> host <IP address or Name>
login
<User Login>
conffile <Conf
F
ile>
[path
<Path to
conf file>]
Delete the uploaded conf file:
set vpn confaction delete
Display all VPN settings and current status:
show vpn [email <Email Address>]
Display detailed VPN status:
show vpn status [email <Email Address>]
Display VPN logs:
show vpn viewlog [numlines <Number of Lines] [email <Email Address>]
Display X.509 certificate for local peer (EMG) and remote peer:
show vpn certificate
Display RSA public key of the local peer (EMG) and remote peer:
show vpn rsakey
Display the uploaded or auto-generated IPSec conf file:
show vpn vpnconf
WLAN Commands
The EMG can be configured as a wireless client (WLAN) or an access point (AP).
Configure the wireless mode:
set wlan mode <client|accesspoint|disable>
Configure the wireless access point:
set wlan accesspoint <parameters>
Parameters
ssid <SSID/Network Name>
ssidbroadcast <enable|disable>
channel <auto|Channel Id>
suite <none|wpa|wpa2>
To Next Page
Loading...
Need help?
General
