8: Services
EMG™ Edge Management Gateway User Guide 155
V3 User Read-Write
V3 User Trap
3. To save, click the Apply button.
Services Commands
Go to Services Commands to view CLI commands which correspond to the web page entries
described above.
Passphrase/
Retype
Passphrase
Passphrase associated with the password for a user with read-only authority. Up to 20
characters. If this is not specified it will default to the v3 Read-Only Password.
User Name
SNMP v3 is secure and requires user-based authorization to access
EMG MIB
objects. Enter a user ID for users with read-write authority. The default is
snmprwuser. Up to 20 characters.
Password/
Retype Password
Password for the user with read-write authority to use to access SNMP v3. The default
is SNMPRWPASS. Up to 20 characters.
Passphrase/
Retype
Passphrase
Passphrase associated with the password for a user with read-write authority. Up to 20
characters. If this is not specified it will default to the v3 Read-Write Password.
User Name SNMP v3 is secure and requires user-based authorization to access EMG unit MIB
objects. Enter a user ID for users with authority to send traps. The default is
snmptrapuser. Up to 20 characters.
Password/
Retype Password
Password for the user with authority to send v3 traps. The default is
SNMPTRAPPASS. Up to 20 characters.
Passphrase/
Retype
Passphrase
Passphrase associated with the password for a user with authority to send v3 traps. Up
to 20 characters. If this is not specified it will default to the v3 Trap Password.
To Next Page
Loading...
Need help?
General
