12: Scripts
EMG™ Edge Management Gateway User Guide 247
2. Click the Add Script button. The page for editing script attributes displays.
Figure 12-2 Adding or Editing New Scripts
3. Enter the following script details:
Script Name A unique identifier for the script.
Type
Select Interface for a script that utilizes Expect/Tcl to perform pattern detection
and action generation on Device Port output.
Select Batch for a script of CLI commands.
Select Custom for an Expect, Tcl or Python script that can be run against a CLI
session or a Device Port, either manually or scheduled to run at periodic
intervals.
To Next Page
Loading...
Need help?
General
