17: Command Reference
EMG™ Edge Management Gateway User Guide 388
RADIUS Commands
set radius
Syntax
set radius <one or more parameters>
Parameters
state <enable|disable>
allowdialback <enable|disable>
clearports <Port List>
custommenu <Menu Name>
dataports <Port List>
dialbacknumber <Phone Number>
breakseq <1-10 Chars>
escapeseq <1-10 Chars>
group <default|power|admin>
listenports <Port List>
permissions <Permission List>
Note: See User Permissions Commands on page 390 for information on groups and
user rights.
timeout <enable|1-30>
Note: Sets the number of seconds after which the connection attempt times out. It may
be 1-30 seconds.
Description
Configures the EMG to use RADIUS to authenticate users who log in via the Web, SSH, Telnet, or
the console port.
set radius server
Syntax
set radius server <1|2> host <IP Address or Hostname> secret <Secret>
[port <TCP Port>]
Description
Identifies the RADIUS server(s), the text secret, and the number of the TCP port on the RADIUS
server.
Note: The default port is 1812.
To Next Page
Loading...
Need help?
General
