1: About this Guide
EMGâ„¢ Edge Management Gateway User Guide 22
Additional Documentation
Visit the Lantronix Web site at www.lantronix.com/support/documentation for the latest
documentation and the following additional documentation.
Chapter 14: User
Authentication
Provides instructions for enabling or disabling methods that authenticate
users who attempt to log in via the web, SSH, Telnet, or the console port.
Provides instructions for creating custom menus.
Chapter 15: Maintenance Provides instructions for upgrading firmware, viewing system logs and
diagnostics, generating reports, and defining events. Includes information
about web pages and commands used to shut down and reboot the EMG.
Chapter 16: Application
Examples
Shows three different configurations to set up and use the EMG unit.
Chapter 17: Command
Reference
Lists and describes all of the commands available on the EMG command
line interface.
Appendix A: Security
Considerations
Provides tips for enhancing EMG security.
Appendix B: Safety
Information
Lists safety precautions for using the EMG.
Appendix C: Adapters and
Pinouts
Includes adapter and pinout diagrams.
Appendix D: Protocol
Glossary
Lists the protocols supported by the EMG unit with brief descriptions.
Appendix E: Compliance
Information
Provides information about the EMG unit’s compliance with industry
standards.
Document Description
EMG 8500 Quick Start Guide or EMG 7500
Quick Start Guide
Provides accessories and part number information,
hardware installation instructions, directions to connect the
EMG unit, and network IP configuration information.
EMG 8500 Product Brief or EMG 7500
Product Brief
Provides product overview and specifications.
Chapter (continued) Description