EasyManuals Logo

Lantronix EMG 8500 User Manual

Lantronix EMG 8500
482 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
EMG™ Edge Management Gateway User Guide 79
7: Networking
This chapter explains how to set the following network settings for the EMG using the web
interface or the CLI:
Network Port Settings
Cellular Modem Settings
Wireless Settings
IP Filter and Routing
VPN Settings
Security
Performance Monitoring
FQDN List
Requirements
If you assign a different IP address from the current one, it must be within a valid range and unique
to your network. If a valid gateway address has not been assigned the IP address must be on the
same subnet as workstations connecting to the EMG over the network.
To configure the unit, you need the following information:
Eth1 IP address: ________ - ________ - ________ - ________
Subnet mask: ________ - ________ - ________ - ________
Eth2 IP address (optional): ________ - ________ - ________ - ________
Subnet mask (optional): ________ - ________ - ________ - ________
Gateway: ___________ - ___________ - ___________ - ___________
DNS: ___________ - ___________ - ___________ - ___________

Table of Contents

Other manuals for Lantronix EMG 8500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lantronix EMG 8500 and is the answer not in the manual?

Lantronix EMG 8500 Specifications

General IconGeneral
BrandLantronix
ModelEMG 8500
CategoryGateway
LanguageEnglish

Related product manuals