17: Command Reference
EMG™ Edge Management Gateway User Guide 453
Description
Configures a currently loaded USB Modem.
Note: It is recommended that the initscript be prepended with 'AT' and include
'E1 V1 x4 Q0' so that the EMG may properly control the modem.
Set the dialout password and CHAP secrets:
set usb modem <U1> dialoutpassword
set usb modem <U1> chapsecret
set usb modem <U1> dodchapsecret
show usb modem
Description
Display product information and settings for any USB modem:
Syntax
show usb modem
VPN Commands
set vpn
Syntax
set vpn <parameters>
Description
Configures setting for an IPsec VPN tunnel.
Parameters
Parameters:
tunnel <enable|disable>
name <VPN Tunnel Name>
auth <rsa|psk|x509>
remotehost <Remote Host IP Address or Name>
remoteid <Authentication Name>
remotehop <IP Address>
remotesubnet <one or more subnets in CIDR notation>
remotesourceip <config|CIDR|IP Address Range|poolname>
localip <IP Address>
localid <Authentication name>
localhop <IP Address>
localsubnet <one or more subnets in CIDR notation>
localsourceip <config4|config6|IP Address>
ikenegotation <main|aggressive>
To Next Page
Loading...
Need help?
General
