17: Command Reference
EMG™ Edge Management Gateway User Guide 399
connect direct
Syntax
connect direct <endpoint>
Parameters
Endpoint is one of:
deviceport <Device Port # or Name>
ssh <IP Address or Name> [port <TCP Port>][<SSH flags>]
where <SSH flags> is one or more of:
user <Login Name>
version <1|2>
command <Command to Execute>
tcp <IP Address> [port <TCP Port>]
telnet <IP Address or Name> [port <TCP Port>]
udp <IP Address> [port <UDP Port>
hostlist <Host List>
Description
Connects to a device port to monitor and/or interact with it, or establishes an outbound network
connection.
connect global outgoingtimeout
Syntax
connect global outgoingtimeout <disable|1-9999 seconds>
Description
Sets the amount of time the EMG will wait for a response (sign of life) from an SSH/Telnet server
that it is trying to connect to.
Note: This is not a TCP timeout.
connect listen deviceport
Syntax
connect listen deviceport <Device Port # or Name>
Description
Monitors a device port.
To Next Page
Loading...
Need help?
General
