17: Command Reference
EMG™ Edge Management Gateway User Guide 429
Description
Mounts a remote NFS share.
The remdir and locdir parameters are required, but if they have been specified previously, you
do not need to provide them again.
set nfs unmount
Syntax
set nfs unmount <1|2|3>
Description
Unmounts a remote NFS share.
set cifs
Syntax
set cifs <one or more parameters>
Parameters
eth1 <enable|disable>
eth2 <enable|disable>
state <enable|disable>
workgroup <Windows workgroup>
Description
Configures the SMB/CIFS share, which contains the system and device port logs.
The admin config command saves EMG configurations on the SMB/CIFS share.
set cifs password
Syntax
set cifs password
Description
Changes the password for the SMB/CIFS share login (default is cifsuser).
show cifs
Syntax
show cifs
To Next Page
Loading...
Need help?
General
