17: Command Reference
EMG™ Edge Management Gateway User Guide 432
set perfmon keep
Syntax
set perfmon keep <Number of Operations to Keep>
Description
Set number of operations stored for each probe.
set perfmon udpjitterresp
Syntax
set perfmon udpjitterresp <enable|disable>
Description
Enable responders for UDP jitter.
set perfmon udpechoresp
Syntax
set perfmon udpechoresp <UDP Port Number|disable>
Description
Enable responders for UDP echo.
set perfmon tcpconnectresp
Syntax
set perfmon tcpconnectresp <TCP Port Number|disable>
Description
Enable responders for TCP connect.
set perfmon add
Syntax
set perfmon add <Probe Name>
type <dns|http|icmp|tcpconnect|udpecho|udpjitter|udpjittervoip>
Parameters
name <Probe Name>
starttime <now|HH:MM[:SS][MMDD]|afterHH:MM:SS>
operations <Number of Operations to Perform>
frequency <Seconds between Operations>
To Next Page
Loading...
