17: Command Reference
EMG™ Edge Management Gateway User Guide 439
set script schedule
Syntax
set script schedule <Script Name> [device <cli|Device Port # or Name>]
[state <enable|disable|delete>] [parameters
<Cmd Line Parameters>]
[starttime <now|HH:MM[MMDD]|afterHH:MM>]
[frequency <Hours/Days between each operation>]
[stoptime <forever|HH:MM[MMDD]|afterHH:MM>]
Description
Schedule a custom script to be run at a certain time, either once or recurring; frequency is
specified as hours (4H for 4 hours) or days (2D for 2 days).
show script
Syntax
show script [type <interface|batch|custom> [name <Script Name>]]
Description
Display list of scripts, or view the details and contents of a script.
show script status
Syntax
show script status [script <Script Name>]
Description
Display the running status of all custom scripts or a single custom script.
show script operations
Syntax
show script operations <Script Name>
Description
Display list of completed results for a custom script.
show script results
show script results <Script Name> [set <all|Operation Set Number>]
[display <head|tail>] [numlines <Number of Lines>]
[email <Email Address>]
To Next Page
Loading...
Need help?
General
