9: PC Cards
SLC™ Console Manager User Guide 147
6. Click the Apply button.
To view the log of all modem activity:
1. Click the View Modem Log link.
PC Card Commands
The following CLI commands correspond to the PC Card. For more information,
see Chapter 15: Command Reference .
pccard storage copy (on page 296)
pccard storage delete (on page 296)
pccard storage dir (on page 296)
pccard storage format (on page 296)
pccard storage mount (on page 296)
pccard storage rename (on page 297)
pccard storage unmount (on page 297)
show pccard storage (on page 297)
pccard modem (on page 294)
show pccard modem (on page 297)
show pccard (on page 297)
set log clear modem (on page 287)
set log modem pppdebug (on page 288)
show log modem (on page 288)
Telnet Port Telnet session port number to use if you selected Telnet. Defaults:
Upper PC Card Slot: 2049
Lower PC Card Slot: 2050
Range: 1025-65535
Authenticate: Checkbox and if selected, the SLC console manager requires
user authentication before granting access to the port. Authenticate is selected
by default for Telnet Port and SSH Port, but not for TCP Port.
SSH Port The SSH session port number to use if you selected SSH. Defaults:
Upper PC Card Slot: 3049
Lower PC Card Slot: 3050
Range: 1025-65535
Authenticate: Checkbox and if selected, the SLC device requires user
authentication before granting access to the port. Authenticate is selected by
default for Telnet Port and SSH Port, but not for TCP Port.
TCP Port The TCP (raw) session port number to use if you selected TCP. Defaults:
Upper PC Card Slot: 4049
Lower PC Card Slot: 4050
Range: 1025-65535
Authenticate: Checkbox and if selected, the SLC console manager requires
user authentication before granting access to the port. Authenticate is selected
by default for Telnet Port and SSH Port, but not for TCP Port.
To Next Page
Loading...
Need help?
General