Lantronix SLC8 User Manual

7: Services
SLC™ Console Manager User Guide 81
To detect and display all secure Lantronix managers and Spider devices on the local
network:
show slcnetwork [ipaddrlist <all|Address Mask>]
Note: Without the ipaddrlist parameter, the command searches the network according to
the search setting. With the ipaddrlist parameter, the command displays a sorted list of all
IP addresses or displays the IP addresses that match the mask (for example,
172.19.255.255 would display all IP addresses that start with 172.19).
Date and Time
You can specify the current date, time, and time zone at the SLC console manager's location
(default), or the SLC unit can use NTP to synchronize with other NTP devices on your network.
To set the local date, time, and time zone:
1. Click the Services tab and select the Date & Time option. The following page displays:
Figure 7-7 Services > Date & Time
2. Enter the following:
Change Date/Time
Select the checkbox to manually enter the date and time at the
SLC device ’s
location.
Date From the drop-down lists, select the current month, day, and year.

Lantronix SLC8 Specifications

General

Brand	Lantronix
Model	SLC8
Category	Server
Language	English