5: Web and Command Line Interfaces
SLC™ Console Manager User Guide 49
1. USB comands are only accessible on SLC USB part numbers -03.
2. PC Card commands are only accessible on SLC USB part number -02.
Command Line Help
For general Help and to display the commands to which you have rights, type: help
For general command line Help, type: help command line
For more information about a specific command, type help followed by the command. For
example: help set network or help admin firmware
For information about the current release, type: help release
Tips
Type enough characters to identify the action, category, or parameter name uniquely. For
parameter values, type the entire value. For example, you can shorten:
set network port 1 state static ipaddr 122.3.10.1 mask 255.255.0.0
to
se net po 1 st static ip 122.3.10.1 ma 255.255.0.0
Use the Tab key to automatically complete action, category, or parameter names. Type a
partial name and press Tab either to complete the name if only one is possible, or to display
the possible names if more than one is possible. Following a space after the preceding name,
Tab displays all possible names.
Should you make a mistake while typing, backspace by pressing the Backspace key and/or
the Delete key, depending on how you accessed the interface. Both keys work if you use
VT100 emulation in your terminal access program when connecting to the console port. Use
the left and right arrow keys to move within a command.
show
auth | auditlog | cifs | cli | connections | consoleport |
datetime | deviceport | emaillog | group | history |
hostlist | ipfilter | kerberos | ldap | localusers | log |
menu | network | nfs | nis | ntp | pccard
2
| portcounters |
portstatus | radius | remoteusers | routing | script |
services | slcnetwork | sshkey | sysconfig | syslog |
sysstatus | tacacs+ | temperature | user | usb
1
| vpn
connect bidirection | direct | global | listen | script | terminate
| unidirection
diag
arp | internals | lookup | loopback | netstat | nettrace |
perfstat | ping | ping6| sendpacket | traceroute
pccard
2
modem|storage
admin
banner | clear | config | events | firmware | ftp | keypad
| lcd | memory | quicksetup | reboot| shutdown | site |
version | web
logout terminates CLI session
Action Category
To Next Page
Loading...
Need help?
General