Lantronix SLC8

15: Command Reference
SLC™ Console Manager User Guide 302
Services Commands
set services
Syntax
set services <one or more services parameters>
Parameters
alarmdelay <1-6000 Seconds>
auditlog <enable|disable>
auditsize <1-500 Kbytes>
authlog <off|error|warning|info|debug>
clicommands <enable|disable>
contact <Admin Contact Info>
devlog <off|error|warning|info|debug>
diaglog <off|error|warning|info|debug>
genlog <off|error|warning|info|debug>
includesyslog <enable|disable>
javabufsize <Number of Lines>
javaterminal <jws|applet>
location <Physical Location>
netlog <off|error|warning|info|debug>
nms1 <IP Address or Name>
nms2 <IP Address or Name>
outgoingtelnet <enable|disable>
phoneip <IP Address>
phonehome <enable|disable>
portssh <TCP Port>
rocommunity <Read-Only Community>
rwcommunity <Read-Write Community>
servlog <off|error|warning|info|debug>
smtpsender <Email Address>
smtpserver <IP Address or Name>
snmp <enable|disable>
ssh <enable|disable>
syslogserver1 <IP Address or Name>
syslogserver2 <IP Address or Name>
telnet <enable|disable>
timeoutssh <disable|1-30 minutes>
timeouttelnet <disable|1-30 minutes>