15: Command Reference
SLC™ Console Manager User Guide 303
traps <enable|disable>
trapcommunity <Trap Community>
v1ssh <enable|disable>
v1v2 <enable|disable>
v3auth <md5|sha>
v3encrypt <des|aes>
v3password <V3 RO User Password>
v3phrase <V3 RO User Passphrase>
v3rwpassword <V3 RW User Password>
v3rwphrase <V3 RW User Passphrase>
v3rwuser <V3 RW User>
v3security <noauth|auth|authencrypt>
v3user <V3 RO User>
webssh <enable|disable>
webtelnet <enable|disable>
The following list includes options which accept the CLEAR command:
Note: CLEAR must be in all caps.
Description
Configures services (system logging, SSH and Telnet access, SSH and Telnet timeout, SNMP
agent, email (SMTP) server, and audit log). Sets a password for an SNMP manager to access the
read-only data the SLC SNMP agent provides and to modify data when permitted.
set services trapenable
Syntax
set services trapenable
Description
Defines the set of SNMP traps that are sent by the SLC console manager.
show services
Syntax
show services
Description
Displays current services.
Site Commands
set services location, contact, v3phrase, v3rwphrase, phonenumber
To Next Page
Loading...
Need help?
General