Lantronix SLC8

15: Command Reference
SLC™ Console Manager User Guide 287
Description
Sets the number of minutes after a lockout before the user can try to log in again. Disabled by
default.
set localusers periodwarning
Syntax
set localusers periodwarning <Number of Days>
Description
Sets the number of days the system warns the user that the password will be expiring. The default
is 7 days.
set localusers reusehistory
Syntax
set localusers reusehistory <Number of Passwords>
Description
Sets the number of passwords the user must use before reusing an old password. The default is 4.
set localusers state
Syntax
set localusers state <enable|disable>
Description
Enables or disables authentication of local users.
show localusers
Syntax
show localusers [user <User Login>]
Description
Displays local users.
Log Commands
set log clear
Syntax
set log clear <Device Port # or Name>
Description
Clears the Device Port local buffer. Local logging must be enabled for a Device Port in order to use
this command.
set log clear modem
Syntax
set log clear modem