Lantronix SLC8 User Manual

8: Device Ports
SLC™ Console Manager User Guide 133
[Current Time:21:25:20]
show portcounter deviceport 7
show portcounter deviceport 7
Device Port: 7 Seconds since zeroed: 1454136
Bytes input: 0 Bytes output: 0
Framing errors: 0 Flow control errors: 0
Overrun errors: 0 Parity errors: 0
[slc251glenn]>
Port Counter Monitor Script Ending......
________________________________________________________________________
Login Out.......
logout
Returning to command line
[slbvz249_glenn]> show script
___Interface Scripts______Group/
Permissions_____________________________________
test3 Def/do
___Batch Scripts__________Group/
Permissions_____________________________________
test1 Adm/
ad,nt,sv,dt,lu,ra,um,dp,ub,rs,fc,dr,sn,wb,sk,po,do
[slbvz249_glenn]>
Sites
A site is a group of site-oriented modem parameters that can be activated by various modem-
related events (authentication on dial-in, outbound network traffic for a dial-on-demand
connection, etc.). The site parameters will override parameters that are configured for a modem.
To use sites with a modem, create one or more sites (described below), then enable Use Sites for
the modem. Sites can be used with the following modem states: dial-in, dial-back, CBCP Server,
dial-on-demand, dial-in & dial-on-demand, and dial-back & dial-on-demand. For more information
on how sites are used with each modem state, s
ee Modem Dialing States on page 136.
To add a site:
1. Click the Devices tab and select the Sites option. The Sites page displays:
2. In the lower section of the page, enter the following:
Note: To clear fields in the lower part of the page, click the Reset Site button.
Site Id
(view only)
Displays after a site is created.
Site Name Enter a name for the site.
Port Select the device port, UPC card slot, or USB port the site is assigned to. For dial-
on-demand sites, a port must be selected. For any other sites, the port selection
can be set to None. See Modem Dialing States on page 136.
Login/CHAP Host The login name (for PAP authentication) or CHAP host (for CHAP authentication)
associated with this site. If a modem has sites enabled and the authentication is
successful at dial-in (for modem states dial-in, dial-back, CBCP server, dial-in &
dial-on-demand, or dial-back & dial-on-demand), and the name that was
authenticated matches the Login/CHAP Host, the site parameters will be used for
the remainder of the modem connection.

Lantronix SLC8 Specifications

General

Brand	Lantronix
Model	SLC8
Category	Server
Language	English