Appendix A: Bootloader
SLC™ Console Manager User Guide 316
Administrator Commands
In addition to the commands that the user can issue, the administrator can issue the following
commands:
imagecopy
Copies an image of the drive from the USB port or from the lower PCMCIA
device to the internal CF card.
passwd
Provides a new password for user admin. The default password for user admin
is admin. User cust does not have a password.
ping
Sends a ping request to the network host.
printenv
Prints bootloader variables.
setenv
Sets environment variables.
showconf
Displays hardware configuration parameters.
To Next Page
Loading...
Need help?
General